[urq] Coolant Reserivor Upgrade

Brandon Rogers brogers at terrix.com
Tue Aug 28 11:03:41 EDT 2007

I think '84s are as Tony says - as I took out my overheat bulb and
installed an in-dash temp gauge - and I know I didn't add any wires.
That would have been too complicated for me!

-----Original Message-----
From: Andrew [mailto:afinn1 at gmail.com] 
Sent: Monday, August 27, 2007 4:30 PM
To: urq at audifans.com
Cc: tlum at flash.net; brogers at terrix.com
Subject: Re: [urq] Coolant Reserivor Upgrade

As a note, I believe this temp gauge mod is only this easy with the
early wiring cars. I think I had to run a separate wire on my '85
because it's wired a little differently. I could be wrong though.
Andrew Finney
1985 UrQ V8
(former '83 and '84 UrQ owner)
If you also want to install the gauge, replace the sensor on the head
with the temp sensor/overheat switch from a T85 4kq or coupe GT.
Install the temp gauge AND REMOVE the blue warmup light because its on
the same circuit.  Now you have both engine temperature and coolant
level warning. 

'83 urquattro #302

More information about the urq mailing list