[urq] Intrax springs for UrQ - Any BTDTs?

[Todd Phenneger]

They lower it,  And are stiffer.  Know of one guy that ran them on a 4kq.
They started sagging after 2-3 years.

OK but I'd prefer H&R's myself.

todd


> From: alexander stickler <a_stickler at yahoo.com>
> Date: Wed, 28 Nov 2007 10:39:51 -0800 (PST)
> To: urq <urq at audifans.com>
> Subject: [urq] Intrax springs for UrQ - Any BTDTs?
> 
> I am looking at getting a set of lowering springs and it appears that what is
> out there is H&R and Intrax and Weitec.
> 
> A found a place that sells the Intrax springs, they are described as a
> progressive rate spring, and are said to lower the car about 35mm front and
> back, which I think is about the same as the H&R.
> 
> 1. Any experience with the Intrax springs? Better than stock (aside from
> lowering for looks)? Worse? Better than H&R? Worse than H&R?
> 
> 2. Any other options out there?  I can only find the Weitecs at D&W in
> Germany. Any thoughts on those?
> 
> 3. Anybody have a set of aftermarket springs around they want to part company
> with? 
> 
> 4. Or, do you have a set of shorter factory springs kicking around? I have the
> earlier (up to '83) springs, later factory one are shorter (according to
> Martin, whom I trust 100%).
> 
> Cheers,
> 
> Alex
> 
> 
>       Ask a question on any topic and get answers from real people. Go to
> Yahoo! Answers and share what you know at http://ca.answers.yahoo.com
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> UPG2008 planning at: http://autos.groups.yahoo.com/group/urquattro/
> 
> You can help keep the audifans site running by shopping at
> http://audifans.com/shop/