[urq] Coil-On-Plug in '84 ur-q Tachometer Feed?
Michael at siliconoptix.com
Thu Jul 5 14:05:43 EDT 2007
It has a spider in the middle and will have one in the
rear diff to in the next few weeks too!
I thought the mechanical/electrical feed on the tranny
drove the speedo? I even remember pulling the electrical
sender from the 200q20vt tranny and installing the mechanical
The rev counter is fed from the coil, except I have 4 too many.
Anyway keep the replies flooding in....
From: Brandon Rogers [mailto:brogers at terrix.com]
Sent: Thursday, July 05, 2007 2:01 PM
To: Michael Hopton; urq at audifans.com
Subject: RE: [urq] Coil-On-Plug in '84 ur-q Tachometer Feed?
Any particular reason you don't want to stick with the mechanical feed
from the tranny? Or have you swapped in a Torsen?
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On
Behalf Of Michael Hopton
Sent: Tuesday, July 03, 2007 2:50 PM
To: urq at audifans.com
Subject: [urq] Coil-On-Plug in '84 ur-q Tachometer Feed?
I am finally motivated to complete the coil-on-plug engine conversion in
my '84 ur-q. I had a 3B setup working perfectly but for some depraved
reason decided to convert it to coil-on-plug. During the conversion an
RS2 turbo, exhaust cam, MAF
injectors and 944 turbo intercooler were added. So it is finally coming
Any ideas on how I get an RPM signal for my '84 ur-q analog tachometer
from an AAN coil-on-plug engine/wiring loom? Is the tachometer signal
pin 40 on the ECU any good?
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection:
Have an urq question? Check the Audifans Knowledgebase!
Have an urq answer? ... Please help others by adding to the KB ... all
More information about the urq