[urq] Blau : Early Rear Tie-Rods

steven j michellepfeiffersx at yahoo.com
Tue Jul 24 16:10:20 EDT 2007

I got 2 from Blau  back at x-mas time.    Blaufernugen.    Early  style with the 2 bends. 

Todd Phenneger <tquattroguy at yahoo.com> wrote:  
I did a brief search of the Archives but didn't find anything.

I need new rear tie-rods for an EARLY Style ur-q suspension. IE...1983. It
seems most parts sources only list ONE tie-rod now that appears to be the
same as the later tie-rods. The early tie rods attached in the middle of
the subframe instead of toward the back where the sway bar is located on
early models. Problem is, this tie rod seems to be LONGER than the later

I took out both and compared them and they seem to be similar in overall
dimensions except length. The early ur-q unit is longer and does have a
thicker main shaft but the ends are the same. Because of the length issue
however it doesn't appear they are swapable.

Does anyone know where to find an early style or an early style END that
would be compatible. The early arms don't have the funky Dogleg end like
the later style does. Any END with the right conical angle and size, and
thread should work.



Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question? Check the Audifans Knowledgebase!
Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!

Get the Yahoo! toolbar and be alerted to new email wherever you're surfing. 

More information about the urq mailing list