[urq] Original 83 front calipers < 581 - screw that holds caliper to guide pins has been NLA for a long time.
tquattroguy at yahoo.com
Thu Jul 26 18:49:10 EDT 2007
Depends on who you get your pads from.
I have gotten pads with the bolt and without. I don't know off-hand but
when I get home I can check. I have a bag with about 8 or these waiting for
future Brake Jobs.
> From: steven j <michellepfeiffersx at yahoo.com>
> Date: Thu, 26 Jul 2007 13:02:38 -0700 (PDT)
> To: <urq at audifans.com>
> Subject: [urq] Original 83 front calipers < 581 - screw that holds caliper to
> guide pins has been NLA for a long time.
> 6 15 54-00 in ETKA
> My car has G60's but I have fresh old G54 calipers and 4 fresh old 280mm
> rotors. I have the original G54s and caliper carriers but am missing these 4
> screws. Also missing the flat plate that slips into the caliper piston
> hollow. (#4) in ETKA.
> Old etka (#3) shows # for these screws as 431 615 141. New ETKA says NLA
> instead of a part #.
> The don't give a screw dimension. Anyone know?
> WOuld these screws be included with the PAD set? The picture for PADs #13
> seems to show a screw in the photo.
> Newer cars use a screw that starts with 321.
> The flat plate #4 seems to be available, if it is really used (can't always
> trust etka).
> Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel
> and lay it on us.
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question? Check the Audifans Knowledgebase!
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!
More information about the urq