[urq] EFI + MAC-14 maxing ataround 5k RPM

[Bob]

Is it a programming issue? On my EMS, I can set ignition or fuel cutoff 
to be anything...
Just something else to look at...
bob

Steve Eiche wrote:
> Is the cutoff at 5k exactly?  What fuel pump relay are you using?  It is 
> the one from a 200, correct?
>
> Have you verified your cam timing?  If the cam is too far advanced, it 
> will run OK at low RPM, but it will not want to rev.
>
> How do the plugs look?
>
> Steve
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!
>
> You can help keep the audifans site running by shopping at http://audifans.com/shop/
>
>