[urq] Too much Crankcase ventalation?Mark R speedracer.mark at gmail.comTue Sep 4 16:45:07 EDT 2007
That is a healthy vaccuum. Why keep the PCV valve setup? Is running the head ventilation though a catch can or charcoal filter, open to atmosphere an option? I'm not familiar with the PCV setup on the URQ, but generally the purpose of a PCV valve is both ventilation, and emissions. Catch can with a filter would be approrpiate, IMHO. Mark Rosenkrantz On 9/4/07, Ben Swann <benswann at comcast.net> wrote: > > I am finally able to drive the Ur Quattro that has the new engine with > Megasquirt - Yeah!. Engine is balanced MC-1 with NF head. I am now > tuning > it, so it will get better and better, but starting way rich, and trying to > figure creative ways to tune since I don't have ready access to a > dyno. I'll > probably need to have someone drive as I make changes to the VE tables, > etc.. > Ideas? > > > > Anyway, after my first extended tuning session and the engine was on the > warm > side, I noticed a nasty squeal almost like a loose belt when the engine > was > idling. I feared the worst as it seemed to be coming from the head and > sounded a little like a metal machining noise, but went away when I gunned > the > engine. Oil level was good - still on the Havalone break-in crap. > > > > I pulled the oil cap and the noise went away with a release of some > serious > vacuum. I repeated this experiment only to conclude that there is so much > vacuum on the head at idle, that it is probably evacuating the cam bearing > or > something to that effect. If I left the cap loose, the noise did not come > back, each time I tightened the oil cap, the noise cam back in a few > seconds. > I have the UrQ PVC hose setup, but so much is removed of the CIS stuff, > there > is fairly much a direct draw into the Intake manifold and the engine is > pulling a good 18-20 lbs of vacuum at idle. > > > > So just seeing if there is any solution to this. I would expect I should > have > some ventilation in the cam area, but this is too much. Ideas? > > > > Ben > > _______________________________________________ > quattro mailing list > quattro at audifans.com > http://www.audifans.com/mailman/listinfo/quattro > --- > Watch this space for ads :) >
More information about the urq mailing list |