[urq] [s-cars] Too much Crankcase ventalation?

[QSHIPQ at aol.com]

Ben
you need to restrict the vacuum port present and or increase the vent  
present.  Since you are roughly 30% more vacuum than a stock urq, try a  restrictor 
30% smaller in diameter.  I like the dowel idea to get the  diameter right, 
then make the right size one out of brass.  You don't have  a PCV problem yet, 
you have a PCV with too high a vacuum feed port.
 
HTH
 
Scott J
 
In a message dated 9/5/2007 10:56:17 A.M. Central Daylight Time,  
benswann at comcast.net writes:

So no  connection to manifold pressure/vacuum?

I was contemplating a catch  reservoir with draincock at bottom - two fittings
at top - one to vent out  crankcase and valve cover and the other to small
filter and/or slight draw  from Intake using one way valve and restrictor.
This way any oil would be  collected and observed, but would retain some PVC
benefit - just not too  much.   Thinking...thinking..

Ben


 



************************************** Get a sneak peek of the all-new AOL at 
http://discover.aol.com/memed/aolcom30tour