[urq] URQ factory service training manual

[Todd Phenneger]

Heh
Cool.
I have these in Booklet form and have been wanting to scan them for some
time but never did.

Thanks.  You just saved me a couple hours.

I have the one for the 3B & AAN if anyone needs.  I could possibly scan them
sometime in the future.  Goes over all the systems of the engine in the S4
in a similar manner.  Factory Tech Training manual.  I havent really looked
at them much but got them when I got my AAN as I figured they would be handy
for the swap.

l8r


> From: Martin Pajak <martin at quattro.ca>
> Date: Wed, 19 Sep 2007 11:13:13 -0500 (EST)
> To: Your Name <audionly at gmail.com>
> Cc: <urq at audifans.com>
> Subject: Re: [urq] URQ factory service training manual
> 
> Hi Peter,
> 
> The document might already be digitised.
> 
> Check out both on my site and let me know if it's the same?
> 
> http://www.quattro.ca/Urq/urq-IST-Introduction.pdf
> http://www.quattro.ca/Urq/urq-IST-MaintAdj.pdf
> 
> Original tires on 8" Ronal would be Pirelli P7 and later P700 in 215/50
> R15 size.
> 
> Hope this helps.
> 
> -- 
> Martin Pajak
> 
> http://www.quattro.ca
> 
> 
> 
>> Your Name
>> Hello.........
>> 
>> I purchased a late '83 URQ this week from a pretty interesting guy. (U.S.
>> car but ordered with no sunroof and cloth interior. The owner bought it
>> strictly to rally) He gave me the factory service training manual that
>> Karl
>> Behrer had given him back in the early '90s. It has no publishing date but
>> was obviously put out in or before 1983 because it has a picture of the
>> early fuse box. It is 52 pages long with pictures and pretty comprehensive
>> i.e. Technical data, Torque data, Turbo system, Vacuum hose diagrams,
>> Cooling system, Wiring diagram etc etc. I think it would be a great
>> assistance to every URQ owner.
>> 
>> Therefore, here is my proposal. The manual is in a spiral and can easily
>> be
>> taken apart and copied except for a couple of diagram fold outs which may
>> take some extra time. The Audifans list has been a tremendous value to me
>> both as an owner and proprietor of Audis. Although I (like most of you)
>> have
>> just sent in funds to Dan to help run this site; I am sure that any
>> additional monies would be well deserved and appreciated. I will
>> personally
>> pay for the copying and mailing cost out of my own pocket if a certain
>> amount of people make an additional contribution to Audifans. I don't know
>> what the amount should be but my thoughts were $50 and a minimum of 50
>> contributors. That would give Dan some extra funds ($2500) to do whatever
>> with and you benefit from an invaluable source of information.. Email me
>> your thoughts and interest and I will proceed from there.  Regards, Peter
>> (
>> Audionly at gmail.com)
>> 
>> Also I have a question please. I just purchased a second set of 8" Ronal
>> wheels but I am looking for the correct original tire size, make and model
>> tire that came on that wheel?
>> _______________________________________________
>> Audifans urq mailing list
>> Send posts to: mailto:urq at audifans.com
>> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>> Have an urq question?  Check the Audifans Knowledgebase!
>> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
>> Have an urq answer? ... Please help others by adding to the KB ... all
>> contributions welcome!
>> 
>> You can help keep the audifans site running by shopping at
>> http://audifans.com/shop/
>> 
>> 
> 
> 
> 
> 
> 
> 
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!
> 
> You can help keep the audifans site running by shopping at
> http://audifans.com/shop/
>