[urq] A4 brakes on urq

[Michele_Deltergo at KeyBank.com]

A4 calipers yes, A4 caliper carriers no.  Did a GB on these a few years 
back, A4/TT calipers, but only the TT carriers make it bolt up to the UrQ. 
 I used 312mm A8 rotors.  This setup required 16 inch wheels, maybe 288mm 
rotors will allow 15 inchers.  Stopping power is very nice with stock M/C. 
(Go figure with brakes made to stop a 4,000 lb car on a 2,800 lb car) Once 
I get my P car brakes settled on the S car, may try them on the UrQ.
Mike

[urq] A4 brakes on urq
Brandon Rogers brogers at terrix.com 
  Anybody done this conversion on an urq yet?  So I guess the
stock A4 rotors are the proper offset?  Anybody knows? 
 
I'm half tempted to swing by a salvage yard and pickup a set of used
calipers and rotors and just see whats up...
 
Brandon
'84 ur





*******************************************************************************
This communication may contain privileged and/or confidential information. It
is intended solely for the use of the addressee. If you are not the intended
recipient, you are strictly prohibited from disclosing, copying, distributing
or using any of this information. If you received this communication in error,
please contact the sender immediately and destroy the material in its entirety,
whether electronic or hard copy. This communication may contain nonpublic personal
information about consumers subject to the restrictions of the 
Gramm-Leach-Bliley Act. You may not directly or indirectly reuse or redisclose
such information for any purpose other than to provide the services for which
you are receiving the information.

127 Public Square, Cleveland, OH 44114
*******************************************************************************


If you prefer not to receive future e-mail offers for products or services from
Key send an e-mail to DNERequests at key.com with 'No Promotional E-mails' in the
SUBJECT line.