[urq] CQ & urq Rear brake upgrade & Compariso

[Andrew B]

See:
http://forums.audiworld.com/quattro/msgs/3884.phtml

and

http://www.audifans.com/pipermail/urq/2005-July/006648.html

I believe these are correct, but IIRC it's s// rotors, 200/v8/s//
calipers, and either carrier.  The correct info should probably go in
the wiki, but I don't know how to add it.


HTH
-Andrew

On 1/13/08, Todd Phenneger <tquattroguy at yahoo.com> wrote:
> OK,
> I posted this a little while ago to just the 20v list. I'm still confused.
> This is in two parts.  1 is urq.  2 is CQ.
>
> For UR-Q, it seems the upgrade path would be
> -V8/S4 Rotors
> - V8/S4/200 20v  Calipers & Carriers.
> QUESTION:  If I'm runing 4kq rear hubs, how does this effect it?  The 4kq
> rear hubs and rotors have a lot less offset than ur-q rotors.  Is there a
> rotor that would work in this scenario?
>
> NOW:
> But for a 91' CQ what would it be?  I know the rotors would have to be
> redrilled if I"m not using 5-bolt hubs.  That's no big deal.
> OR...Alternatively, can I put my ur-q Rear Calipers on the CQ and then
> upgrade the UR-Q which will have significantly more power?
>
> I guess the real question here is WHAT rear calipers are directly swappable
> with the CQ rears.  All the 5ktq/200/4kq/5ktq  etc rears are basically the
> same rear caliper but they are not all swappable due to different E-brake
> mechanisms, orientations, etc.
>
> A) What caliper cold I replace my bad CQ Drivers Rear with if I wanted to
> just get it back on the road.
>
> B) What combination would I need to upgrade to the Vented Setup.
>
> Thanks
>
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> UPG2008 planning at: http://autos.groups.yahoo.com/group/urquattro/
>
> You can help keep the audifans site running by shopping at http://audifans.com/shop/
>