[urq] [s-cars] Headlight motors, type 44 ... wiring?

[Dave C]

Jim,
I think you are right.  I'm missing a relay and have no idea what part
number or anything else about it :-(
The black wire is much thinner than the other two, so it would be likely
providing a signal.  The switches do have numbered settings.  It makes sense
that the motors would have pre-set travel distances, only function when the
headlights were on, and other functions controlled by a relay.

 The motors might work if I just hooked up the ground and yellow power
wires, but then I'd have to be careful, keep curious fingers away from the
switch, etc ... I think I'll give that a try before installing everything.

 Does anybody out there know what the relay part number would be?  Maybe I
can figure it out from the
FA.  Is anybody in Europe listening?  Phil Payne, where are you when I need
you?

Thanks everyone,
Dave C.


On Sun, Sep 7, 2008 at 8:04 AM, Jim Pasqualoni <jim.pasqualoni at gmail.com>wrote:

> Dave,
>
> Brown is ground, and the others are for raising or lowering.  Not sure
> which wire does which, so you may have to dicker with them.  Now, is there a
> relay involved in this?  Would seem to me that there should be, since the
> switch is of a rotary nature, and the motors are actuated for a pre-set
> travel distance when the dial is turned to position 1, 2 or 3...
>
> HTH,
> Jim