[urq] vacuum brake booster conversion

[craigcook at rogers.com]

Mike,

I just did this swap on my 84 urq. I used the booster and master cylinder from 
a Audi 90.It has 4 ports, one of them has been blocked off.
I wanted a newer rust free booster. Anything up here in Canada is usually
rusted out.
I also used a Wilwood proportioning valve for pressure control for the rear.

You can see a pic here.
http://www.motorgeek.com/phpBB2/viewtopic.php?t=12422&postdays=0&postorder=asc&start=150

It's not very clear, however I can take a better pic if you want.

Cheers,

Craig.




________________________________
From: Mike Sylvester <mike at urq20v.com>
To: urq list <urq at audifans.com>
Sent: Monday, April 6, 2009 7:14:13 AM
Subject: [urq] vacuum brake booster conversion

For those who have converted to vacuum assisted brakes, what master
cylinder did you use?
Does the stock urq master cylinder mate to the vacuum booster properly?

Mike

www.urq20v.com


_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq

Interested in helping make urq26 happen?  Send an e-mail to urq list admin.

Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/

You can help keep the audifans site running by shopping at http://audifans.com/shop/