[urq] vacuum brake booster conversion

[Mike Sylvester]

My vacuum booster is from a 4kq.

Mike

www.urq20v.com

> -------- Original Message --------
> Subject: Re: [urq] vacuum brake booster conversion
> From: craigcook at rogers.com
> Date: Mon, April 06, 2009 8:16 am
> To: Mike Sylvester <mike at urq20v.com>, urq list <urq at audifans.com>
> 
> 
> Mike,
> 
> I just did this swap on my 84 urq. I used the booster and master cylinder from 
> a Audi 90.It has 4 ports, one of them has been blocked off.
> I wanted a newer rust free booster. Anything up here in Canada is usually
> rusted out.
> I also used a Wilwood proportioning valve for pressure control for the rear.
> 
> You can see a pic here.
> http://www.motorgeek.com/phpBB2/viewtopic.php?t=12422&postdays=0&postorder=asc&start=150
> 
> It's not very clear, however I can take a better pic if you want.
> 
> Cheers,
> 
> Craig.
> 
> 
> 
> 
> ________________________________
> From: Mike Sylvester <mike at urq20v.com>
> To: urq list <urq at audifans.com>
> Sent: Monday, April 6, 2009 7:14:13 AM
> Subject: [urq] vacuum brake booster conversion
> 
> For those who have converted to vacuum assisted brakes, what master
> cylinder did you use?
> Does the stock urq master cylinder mate to the vacuum booster properly?
> 
> Mike
> 
> www.urq20v.com
> 
> 
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> 
> Interested in helping make urq26 happen?  Send an e-mail to urq list admin.
> 
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
> 
> You can help keep the audifans site running by shopping at http://audifans.com/shop/