[urq] Vintage 80's steering wheel

[Mike Del Tergo]

L-A,

you have already found it.  Bradys 4 spoke was a rally model.  A quick look through some of the rally footage/pix of the era will show that wheel in a few of Rohrls rallying UrQ's.  There was also a 3 spoke version, not sure if it saw rally duty.  I've had both and like the thickness but these models have finger cut out notches in them and I prefer the smooth later sport versions.  IIRC these are Italian made by ATIWE (you can tell because they mount to the boss with 3 larger set screws vs the later sports Italian made by Nardi with the more standard 6 set screw mount to the hub.

Mike

 


From: Louis-Alain Richard <larichard at plguide.com>
Subject: Re: [urq] Vintage 80's steering wheel

 
While I appreciate the suggestions about the OEM wheels (urQ 4-spoke, S2,
urQ 3-spoke), my original question was about an aftermarket wheel that would
look like a Rally-car wheel of the 80's era.
 
One lister suggested a Fitti E3, one other a Momo Monte-Carlo. I've found a
Sparco Targa or Monza.
 
Any other suggestions ? 
 
Louis-Alain
 

_________________________________________________________________
With Windows Live, you can organize, edit, and share your photos.
http://www.windowslive.com/Desktop/PhotoGallery