[urq] 83 ur-q brake servo rebuild questions
spotatashleys at hotmail.com
Mon Nov 30 11:13:26 PST 2009
I researched this a while ago and some kind soul pointed me in the direction
of a great web page with pictues of a dismantled alloy servo that enabled me
to dismantle a spare one I had. With a bit of research and some help from
friends on the urq-list I managed to get all the seals and o-rings to
rebuild the servo although thankfully I have not had to use it yet (equally
I don't know whether it works properly or not - can't see why it shouldn't).
The link to the web page is: http://www.quattro.ca/Urq/Brake_servo_guide.pdf
Hope this helps.
I'm sure I got one or more of the seals from Alan Pemberton (on urq list)
who is somewhere on west coast Canada I think.
Hope this helps
'87 WR - wet and windy Worcestershire, England
----- Original Message -----
From: "urq" <urq at pacbell.net>
To: "'quattro list'" <quattro at audifans.com>
Cc: <urq at audifans.com>
Sent: Monday, November 30, 2009 6:12 PM
Subject: Re: [urq] 83 ur-q brake servo rebuild questions
I don't usually go for spamming multiple lists, but since you didn't include
the urq group I'll make sure folks there see your request.
I still don't have BTDT on the actual rebuild, but I can tell you that yes,
there are two types of hydraulic brake servos on the urq, a cast iron unit
and an alloy unit. You may want to search the archives and the KB, I do
recall someone posting the list of parts required.
I'm hoping this will be a quick one, but I think I know better...
I'm looking for information on a rebuild for the hydraulic brake servo on an
I've seen a pictures and a procedure on the rebuild but I'm not finding
information like part numbers for the seals/o-rings, etc.
Also are they're more than one type of servo used based on vintage or vin
Audifans urq mailing list
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
More information about the urq