[urq] Coupe/urQ door handle reinstallation

[Peter]

You need to get a coat hanger and make a small hook on one end. Hook it onto
the lock linkage first and then put the handle in just far enough that the
"crescent" rotary of the locking mechanism is just inside the outer door
shell and "pull" the lock linkage into the rotary slot. Do the same for
the latch linkage. You also want to make sure the "slide" mechanism in the
actual catch is not gummed up. You can test this by locking the door and
pulling on the trigger. If it goes freely all the way back towards the
handle; the slider is free. If it stops 1/2 way; then the slider is gummed
up and eventually you will break another handle trigger. Regards, Peter


2009/10/25 Andrée-Anne Bourgeois <laraa at sympatico.ca>

> Hi guys,
>
>
>
> I’m trying to reinstall driver’s door handle without removing the inner
> panel. Bentley says yes, but I don’t have a clue how I can attach the 2
> rods
> on the handle thru that small a hole.
>
>
>
> Any tips ?
>
>
>
> Louis-Alain
>
> _______________________________________________
> Audifans urq mailing list
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> http://www.audifans.com/kb/List_information
>
> Pictures/Polls/Database at: http://autos.groups.yahoo.com/group/urquattro/
>
>


-- 
When buying and selling are controlled by legislation, the first things to
be bought and sold are legislators.
 - P. J. O'Rourke