[V6-12v] Project Audi - outside temp display illumination

Tom Christiansen tomchr at ee.washington.edu
Mon Mar 1 13:07:14 EST 2004


The bulb (12V 50mA I think it was) I got from crap shack (as you politely 
put it) had a sort of a base one it. It still had the solder pins, but the 
bottom of the bulb was wider than the top. So it wouldn't fit through the 
hole in the backlight fixture. A 1/8" (or was it 3 mm) drill solved that 
problem... Just be careful not to crack the plastic.


At 07:36 PM 2/29/2004 -0500, clive young wrote:
>I just did the following procedure. took me all of about .5 hour to get 
>the old bulb desoldered. If any one needs to do this it is about a 1.5 on 
>the agro scale if you know how to solder.
>just need a bulb from crap shack now.
>V6-12v mailing list
>V6-12v at audifans.com

More information about the V6-12v mailing list