[V8] Re: Eurologht Connector Wiring
knotnook at traverse.com
Tue Aug 24 21:01:47 EDT 2004
Thanks, Dave & Dave.
This ought to get me going.
Now, does anyone have a source for connectors that will match up with the
US DOT connectors in the wiring harness and then get relayed to these
lights? I've got relays (one for highs, one for lows ought to do it,
right?) and a fuse holder so I can power the relays from the under-hood
jumper post with a fused 12 volts.
At 08:28 PM 8/24/2004 -0400, Dave Head wrote:
> From Dave Forsyth, March 02
>there are numbers on the back of the lamp next to the pin it locates .
>56b LOWBEAM POSITIVE TOP LEFT PIN
>56a HIGHBEAM POSITIVE TOP RIGHT PIN
>57 SIDEMARKER LIGHT MIDDLE LEFT PIN
>58 INDICATER LIGHT IN HEADLAMP MIDDLE RIGHT PIN
>Wire 57 & 58 TOGETHER
>31 GROUND LOWER LEFT PIN
>31 GROUND LOWER RIGHT PIN
>wire 31 & 31 TOGETHER
>Kneale Brownson wrote:
>>Can anyone tell me (especially by color) what wires go to which of the
>>connectors in the V8 Eurolight headlight connector shown here:
>>The connector has female sleeves to which the wires go. They have real
>>short sleeves on the visible end for the wire ends with a hole through the
>>side of those sleeves. I presume this is for soldering on the wires rather
>>than for crimping them in place. Those sleeves slide over the studs on the
>>quattro mailing list
>>quattro at audifans.com
More information about the V8