[V8] hot start problem which sensor
Bob.Korn at Fike.com
Tue Jun 8 15:53:58 EDT 2004
There both the same, different colors originally. If your going to replace,
do them both while your in there.
"They are identical except for the color of the plastic connector cover and
the cap at the sensor. I got two of the gray ones and put black electrical
tape on the connector to avoid confusion. The other sensor wasn't available
at the somewhat reduced price I could get the gray one for. I got mine from
Wendy Hagar of Hagar Auto Parts, who has some sort of dealer source. You
can e-mail her at snolvr8 at msn.com
At 09:59 PM 5/10/2004 +0000, William Gutierrez wrote:
>to follow up on my previous questions regarding the reference sensors,
>I recall from a discussion in the past that the timing and engine speed
>sensor were interchangeable. Is that the case, or are they different."
From: Ron Wainwright [mailto:ron_01056 at yahoo.com]
Sent: Tuesday, June 08, 2004 12:11 PM
To: v8 at audifans.com
Subject: [V8] hot start problem which sensor
This morning I had the classic hot start symptom, I'm a roofer so i meet
the guy's at a local coffee house & went to leave but the car wouldn't
start, so I did a spark test & got no spark from either pass side or driver
side spark plugs. So after about an hour the car finally started, so from
other peoples BTDT I come to the conclusion it's the sensor. But since I'm
new to V8's I'm not sure which one.
I just want to know if it's the ignition reference sensor (G4), or the
engine speed sender (G28). I tried to search the archives but they are a
I appreciate the lists wisdom.
Do you Yahoo!?
Friends. Fun. Try the all-new Yahoo! Messenger.
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question? Check the Audifans Knowledgebase!
Have a V8 answer? ... Please help others by adding to the KB ... all
More information about the V8