[V8] Clutch hydraulic hose source
Bob.Korn at Fike.com
Tue Oct 5 17:28:49 EDT 2004
These guys have done a great job on all my steering hoses. Swivel ends, etc.
Very reasonable prices, quick turn around.
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
Sent: Tuesday, October 05, 2004 2:48 PM
To: v8 at audifans.com
Subject: RE: [V8] Clutch hydraulic hose source
I'm pretty confident that the flexible line is identical to any other type
44 based manual tranny. You should not need to replace the hard line ...
there's a flare nut connection at the interface from hard to flex line. If
you are doing this I'd recommend that you replace the clutch slave cylinder
at the same time ...
I'm a bit hesitant to make this offer given the fact that I'm still waiting
for some tools I've lent out to be returned ... but I do have a flex line in
the garage at home right now ... if you really need the car fixed right away
I would be willing to ship it to you with the expectation that you would
provide a replacement ...
San Jose, CA (USA)
2x '91 5-speeds
'88 5kCSQ Avant
'92 BMW k1 (jonesin for a K1200S ...)
... here its only getting cold enough to start turning on the heated grips
> Anyone know where I can get a replacement hydraulic hose for the
> clutch in my '91 V8 5spd? This is the rubber/steel line that runs
> from the clutch master to the slave. Mine burst about a week ago and
> I can't find a replacement. Dealer says three weeks minimum.
> Would a 200 line work? They both have the same clutch master and
> slave, but for some reason, don't share the same line between them.
> Anyone know the differneces between the 200 and the v8? How about a
> shop that could repair my existing line? Any help would be greatly
> appreciated. Without a car, I ride my bike to work, and the mornings
> are getting mighty cold.
Audifans V8 mailing list
Send posts to: mailto:V8 at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
Have an Audi V8 question? Check the Audifans Knowledgebase!
Have a V8 answer? ... Please help others by adding to the KB ... all
More information about the V8