[V8] V8 cutting out at about 1800 rpm Hall sensor
glbpro at centurytel.net
Fri Sep 17 11:17:08 EDT 2004
Did not know the cam can jump a tooth - worth checking. The TB has about
30K on it - I'm not looking forward to doing that ;-(
Jeremy Ward wrote:
>Hey guys, what are the symptoms when a cam jumps one belt tooth? Could that be what's going on?
>How many miles does your V8 have? Do you know when (and where) the timing belt was last done?
>Sent from my BlackBerry Wireless Handheld
>From: v8-bounces+jward=mti-interactive.com at audifans.com <v8-bounces+jward=mti-interactive.com at audifans.com>
>To: V8 at audifans.com <V8 at audifans.com>
>Sent: Fri Sep 17 06:57:00 2004
>Subject: Re: Re: [V8] V8 cutting out at about 1800 rpm Hall sensor
>Here is the latest on the v8 cutting out at 1800. They have been able
>to get it to through a code (cam position) I think this may be the hall
>sensor. I feel strongly it not the dist. cap rotors or wire as they have
>all been replaced with new and we have the same results as the old. The
>v8 does not loose power as some of the post indicate, - it cuts out hard
>when above 1800. As for the fly wheel teeth - man I hope they are all
>there! Thanks for all the thoughts - I'll let the list know when it's
>running well again. I want it back before the snow - wahooooo!
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question? Check the Audifans Knowledgebase!
>Have a V8 answer? ... Please help others by adding to the KB ... all contributions welcome!
More information about the V8