[V8] turbo v8
sdewitt at stx.rr.com
Mon Aug 29 17:43:18 EDT 2005
The 3.6 and 4.2 are different motors internally, according to Audi. I
really doubt that the crankshafts will go from one motor to the other.
Other bad part is internal engine bits are hard to find. I'd either
find a 4.2 or use the 3.6, unless you want to spend several zeros
machining a custom crank etc. etc. etc.
----- Original Message -----
From: spcole at mn.rr.com
Date: Monday, August 29, 2005 3:50 pm
Subject: [V8] turbo v8
> I know this might have already been discussed in the list but i have
> been out of town for several weeks and heard that there was an on
> discussion and had a proposal for debate. I am the owner of a 3.6L v8
> out of a 90 V8 this is to be the new power plant for my 91 CQ i have
> been looking and parts for this motor and it dawned on me that if the
> 4.2 is the same casting only bored and stroked you could make a far
> supior 4L that would be ideal for a twin turbo application. does
> anyoneknow if my crazy idea would work with a 3.6L with the 93mm
> crank and
> 82.5mm pistons. this i belevie would be a far more durable motor then
> the 4.2 and would be able to go to higher rpms. if anyone knows
> if this
> would work please let me know because i am seriosly lookin at buildin
> this motor and runnin it normally aspirated for now but it would only
> need a piston swap for the tt conversion and would most likly be
> runninga coil per cylinder igintion system from electromotive.
> thanks sean
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection:
> http://www.audifans.com/mailman/listinfo/v8Have an Audi V8
> question? Check the Audifans Knowledgebase!
> Have a V8 answer? ... Please help others by adding to the KB ...
> all contributions welcome!
More information about the V8