[V8] Re: Radiator Replacement

bblake1055 at aol.com bblake1055 at aol.com
Wed Jul 20 16:55:56 EDT 2005

Thanks for the Radiator replies.  I will start to tear her down tonight!!!
-----Original Message-----
From: Campozano, Robert <RCAMPOZANO at mgmmirage.net>
To: bblake1055 at aol.com
Cc: v8 at audifans.com
Sent: Wed, 20 Jul 2005 10:35:05 -0700
Subject: Re: Radiator Replacement

Just did this and yes, it?s about a 2 hour job if you remove the front bumper.  The bumper is basically held in by 4 nuts, 2 on each side.  I am not very technical because I had help on this but I am almost positive that removing these 4 bolts and 1 screw under the wheel wells will allow for your bumper to come out.  Of course there are some light sensors and things to unplug, but not a lot.  Take the side marker lights out as well.  Once done, you will notice that you can drop the AC condenser fairly easily.  Hope this helps.
1990 V8 3.6L Auto
From: bblake1055 at aol.com
Subject: [V8] Radiator replacement
To: v8 at audifans.com
Message-ID: <8C75B5A3F82EE49-2AC-90F1 at MBLK-M42.sysops.aol.com>
Content-Type: text/plain; charset="us-ascii"
The radiator in the 90' has finally gone.  I replaced one years ago without taking the bumper off and it took nearly 5 hours just to get it out. 
Is there a way to search the archives for "radiator replacement"  I've been told that removing the bumper is the quicker and eaiser way to go.
Any help would be appreciated
Zay Campozano | Computer Engineer | MGM MIRAGE?
rcampozano at MGMMirage.net

More information about the V8 mailing list