[V8] ISV and Hood Closing
kneale at coslink.net
Thu Jun 9 14:04:29 EDT 2005
I think you want to use something like throttle body cleaner on the ISV,
not brake cleaner. see:
Most throttle body cleaners incorporate some lubricating feature for the
At 08:49 AM 6/9/2005 -0600, dsaad at icehouse.net wrote:
>On the ISV - it actually takes a pretty good ohm meter to measure accurately a
>low resistance. Be sure to zero the meter and leads. More important is how it
>works - which is not good in your case. A cleaning may help - remove the ISV,
>hold the orifice up and fill the cavity with BRAKE CLEANER SPRAY.
>Wash,rinse,repeat. If you have a small piece of wood or plastic, gently rock
>shutter back and forth - but be careful not to scratch or bend it.
>If the cleaning does not help you are probably due for a new unit.
More information about the V8