[V8] Stereo Install Question
daves745t at optonline.net
Fri Nov 4 18:26:33 EST 2005
Thanks Ingo - yeah this was a real treat, which
is why it was so disappointing when nothing
happened. I will definitely check the amp
as suggested. Thanks.
I do want to clarify one thing that when I said
that I did not use any existing wires, I meant
the speaker wires. Utilizing the Crutchfield
Harness I tapped into the stock harness for
power, antennae and ground. Which is why
I suppose the radio turned on and antennae
went up! :)
----- Original Message -----
From: Ingo Rautenberg <i.rautenberg at waratap.com>
Date: Friday, November 4, 2005 6:20 pm
Subject: Re: [V8] Stereo Install Question
> Done this on two V8s -- fun, eh? I ran into a similar problem,
> but mine
> ended up being a problem where the head unit wasn;t powering up
> the amp --
> which is not the problem in your case.
> OK, I'll preface this by saying I'm not familiar with either your
> head unit
> or amp. However, the good news is that they are both turning on.
> Many amps
> have a switch/switches enabling you to run either RCA or head unit
> speakerinputs. Maybe your amp is switched to use the speaker
> leads and not the RCA
> inputs. To negate any radio problem, I suggest playing the CD at
> 1/3 volume
> (should be plenty). So if max is indicated as 33, run 11 :-).
> Also, many
> amps have adjustable gain for the RCA inputs, so these may need to be
> adjusted as well.
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.857 / Virus Database: 584 - Release Date: 2/10/2005
More information about the V8