[V8] ECU code II

Coleman, David David.Coleman at blackrock.com
Thu Sep 1 13:30:44 EDT 2005

I just read my 3:30 a.m. post, and what a bunch of bleary-eyed garble.
At least I got it down so I'd remember what all happened..

If you please, the issues in a nutshell:

1)  When I run the diagnostic output test, should I be able to audibly
hear the charcoal canister actuate?  Do I need to remove the fender
liner to see/feel it work?  The rest of the output tests work fine.  And
the wire connector at the canister solenoid shows power when running.

2)  Should the wire connector to the Engine Coolant Temp sensor behind
the head show power when the car is running?  Mine does not.  If it
should, and the fuse is good, is my next move to the ECU pin-out?

OK.  Thanks all.


> Ok it's now 3:ep am eastern. Here's what I've worked thru:
> That 2324 (ecu ground, bad ecu) still there...

THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM DISCLOSURE. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this message and any attachment is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and permanently delete it from your computer and destroy any printout thereof.

More information about the V8 mailing list