[V8] Steering Dampner

Jeremy Ward jward.v8 at gmail.com
Wed Aug 23 19:57:11 EDT 2006

FWIW, I bought the ~$100 V8Q part from SJM.  The old one that came out with
the rack replacement has some slop in it and had "100" silk-screened on the
side of it.  Not sure if that was as in Audi 100, but the new part firmed up
the steering on my non-servotronic V8 quite nicely.


- Jeremy

-----Original Message-----
From: v8-bounces at audifans.com [mailto:v8-bounces at audifans.com] On Behalf Of
cobram at juno.com
Sent: Wednesday, August 23, 2006 2:01 PM
To: dsaad at icehouse.net
Cc: v8 at audifans.com
Subject: Re: [V8] Steering Dampner

dsaad at icehouse.net writes:
> calibration. Didn't someone report that these other dampers didn't 
> work as well?
Back when Scott Mockery had a V8Q, he reported that the VW Fox damper
actually worked better than the V8Q part when nonstandard size
wheels/tires were used.  This was back when the list was on the
Washington U server, so YMMV.  I've never noticed any kind of difference.

Health is merely the slowest possible rate at which one can die.

More information about the V8 mailing list