[V8] Hood wiring

Kneale Brownson kneale at coslink.net
Wed Dec 6 20:31:07 EST 2006

I haven't found a way to remove the washers from either hood.

At 07:47 PM 12/6/2006 -0500, Audi Sport wrote:
>Wouldn't it be easier to use the 200 washers? Or are they of a different
>> Date: Wed, 6 Dec 2006 19:46:52 -0500> To: v8 at audifans.com> From: 
>kneale at coslink.net> Subject: [V8] Hood wiring> > The V8 hood has separate 
>wires to and from the windshield washer nozzle> heaters. > > I have a V8 
>hood on my 200q20v Avant. The 200 had a single circuit for the> nozzle 
>heaters. They're all listed in the Bentley/V8 service manuals as> 0.5 wires, 
>although the ones on the V8 hood seem more robust than the one> from the 
>200. Can I lump the two V8 wires with the single wire from the> 200 to keep 
>the heaters active?> > The V8 hood has three ground wires, a smaller from 
>the underhood light and> two 0.5s from the nozzles (I presume). Should I run 
>those all to a good> ground on the body? The 200 uses only one tiny ground 
>wire for both the> light and the nozzles.> 
>_______________________________________________> Audifans V8 mailing list> 
>Send posts to: mailto:V8 at audifans.com> Manage your list connection: 
>http://www.audifans.com/mailman/listinfo/v8> Have an Audi V8 question? Check 
>the Audifans Knowledgebase!> http://www.audifans.com/twiki/bin/view/Audi/V8> 
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!
>Audifans V8 mailing list
>Send posts to: mailto:V8 at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
>Have an Audi V8 question?  Check the Audifans Knowledgebase!
>Have a V8 answer? ... Please help others by adding to the KB ... all 
>contributions welcome!

More information about the V8 mailing list