[V8] TB Replacement

Ingo Rautenberg i.rautenberg at waratap.com
Wed Jun 7 13:28:05 EDT 2006

Try Bruce at GermanCarConnection.com

----- Original Message ----- 
From: "Rich Ehlert" <bkrddrvr at abcinet.net>
To: <V8 at audifans.com>
Sent: Wednesday, June 07, 2006 12:41 PM
Subject: [V8] TB Replacement

> Hi All,
> After about 2 months without my trusty V8, I am finally getting around
> to changing the TB.  If you racall, it quit running at 120 K and all
> indcations are that it slipped a tooth on the passanger side bank.  I
> have good compression on the drivers side, but only +- 60 on the
> passangers side.  That said, when I ordered the parts from Blau, they
> couldn't? come up with the Friction pad, Oil pump pulley bearing, or
> front oil pump pulley seal.  Any one have an idea of where I should
> try?  And isn't there oil pulley bearing swap for less?  Seems I
> remember reading that from someone a long while back.
> Thanks All,
> Rich Ehlert
> 1993 V*Q
> _______________________________________________
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> Have an Audi V8 question?  Check the Audifans Knowledgebase!
> http://www.audifans.com/twiki/bin/view/Audi/V8
> Have a V8 answer? ... Please help others by adding to the KB ... all
contributions welcome!

More information about the V8 mailing list