[V8] tricks and tricks for working in the V8's

Bluemaxww1 at aol.com Bluemaxww1 at aol.com
Tue Apr 24 12:53:57 EDT 2007

The miner light is a good one.  I use that, of course sometime it  tangles 
with the reading glasses I have around my neck, because I can't see  worth a 
d*** any more.
The plastic trays work well too.  Great for mixing up JB weld, and if  you 
are tearing apart something on your bench, you can use them for keeping all  the 
little parts separated into groups.
If you are working on your brakes, you can use a small bungee cord to hold  
the caliper up out of the way.
Any thing that has to do with nuts and bolts under the car, or on the  
engine, gets anti-seize, depending upon the heat near it or on it, I use,  Aluminum 
Zinc, copper, or nickel anti-seize.  They never come off hard  again.
And lets never forget, that a long piece of pipe over the handle of the 3/4  
inch breaker bar is your friend.
Greg W.

************************************** See what's free at http://www.aol.com.

More information about the V8 mailing list