[V8] Timing Belt Change...wish me luck.
ron_01056 at yahoo.com
Mon May 14 14:34:03 EDT 2007
--- NicolCS at aol.com wrote:
> In a message dated 5/14/2007 9:36:44 A.M. Pacific
> Standard Time,
> tonyandlillie1 at earthlink.net writes:
> I'll add a third to that. As I said, it is
> possible. However, nothing broke
> on me, and I still would never do the job with the
> front end on. But, to
> each their own...........
> Tony Hoffman
> As long as we are on the topic... I'm getting ready
> for this job myself and
> I noted a couple of weeks ago that someone said that
> there is a large "Costal"
> connector in the harness that simplifies the
> removal of the front end. I
> looked around the LF fender area and the LF fender
> where it meets the core
> support and didn't see any large electrical
> disconnect in the harness. Did I
> miss it? Do all the V8s have the disconnect?
> TIA. Craig Nicol
> 90 V8 97k
> 95 S6 Avant
Craig, the "Coastal" connector is on the pass side
frame rail..just before the front mount.
Be carefull pulling the 2 halfes apart. The plastic
is very brittle.
No need to miss a message. Get email on-the-go
with Yahoo! Mail for Mobile. Get started.
More information about the V8