[V8] OX Sensor Varients
scott_matus at yahoo.com
Thu Nov 8 09:14:04 PST 2007
Is there a procedure in the manual for testing the readings for the MAF sensor? Is there a write-up in the K-base?
----- Original Message ----
From: Tony and Lillie <tonyandlillie1 at earthlink.net>
To: S_Matus <scott_matus at yahoo.com>
Sent: Wednesday, November 7, 2007 4:01:24 PM
Subject: Re: [V8] OX Sensor Varients
No, they all work the same. 0-1V, with a good ground reference. Another
thing to check is the readings for the MAF. I had a bad one, no codes,
ran too rich. Replaced with a known good one, and all is better.
----- Original Message -----
From: "S_Matus" <scott_matus at yahoo.com>
To: "V8" <v8 at audifans.com>
Sent: Wednesday, November 07, 2007 2:43 PM
Subject: [V8] OX Sensor Varients
> To save a few $s I created a harness to use the 4-wire Ford OX sensor
> the short 8" leads. The fitment for this is a 3.0L Ford in an
> 1985-1994ish. These Ox sensors are about $38.
> Are there different output ranges for different Ford applications? I
> cannot seem to get my V8 to pass emissions. I have tried 2 sensors
> cannot pass the State inspection.
> The car has no codes. New plugs, rotors & caps. I have not invested
> wires, but will check them this weekend.
> Any advice is appreciated.
> '90 V8
> '91 V8 5-sp
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection:
> Have an Audi V8 question? Check the Audifans Knowledgebase!
> Have a V8 answer? ... Please help others by adding to the KB ... all
> contributions welcome!
> You can help keep the audifans site running by shopping at
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
More information about the V8