[V8] 18 mm offset
ekellock at gmail.com
Wed Apr 2 11:04:53 PDT 2008
The offset you state will push your tire/wheel out from the center
line of the car 17mm from stock. So any rubbing that might occur
would likely be with the finder lip or fender liner in regard to the
tire corner/edge as it will be that much closer to those areas.
Given the same size wheel/tire you currently have, look at the outside
(visible) surfaces and add 17 mm. Turn the wheels full lock and find
the closest distance between tire and fender liner currently and add
On 4/2/08, Coleman, David <David.Coleman at blackrock.com> wrote:
> I'm looking to swap my 17x8 35ET wheels for the same dimensions but with
> To help get my head around the effects, will this increase or decrease
> the amount of any rubbing at full lock?
> And does anyone have any BTDTs if the increased offset will make the
> rear wheels protrude out too far (i.e. past the fender lip) ?
> THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY ATTACHMENT MAY BE PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE PROTECTED FROM DISCLOSURE. If the reader of this message is not the intended recipient, you are hereby notified that any dissemination, distribution, copying or use of this message and any attachment is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and permanently delete it from your computer and destroy any printout thereof.
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/v8
> You can help keep the audifans site running by shopping at http://audifans.com/shop/
More information about the V8