[V8] Subframe bushes
ron_01056 at yahoo.com
Wed Apr 2 15:03:02 PDT 2008
Count me in :-)
I'll ask some others who are not on the list as well.
& wasn't your V8 "undergoing" a 4.2 conversion last
time we talked ;-)
Ron "undergoing" 4.2 conversion
--- too many quattros <thequattroking at yahoo.com>
> hey, if i had a fair enough count of people who were
> interested, i would
> pull my bushings and have them copied. my v8 is
> under going a 4.2
> conversion so i don't drive the car. It cost me
> about $300 to do my set
> because of the setup time. material was nothing.
> like $30 worth...or
> something crazy cheap like that. my bushings were
> done RIGHT. i consulted
> a with a mechanical engineer friend of mine who
> pulled out a bushing and
> bearing design manual and calculated how big the
> inner race needs to be.
> and would u know it, the one from the factory rubber
> bushings was damn near
> spot on! so, i cut those out and used them.
> in short, i am sure if there was enough interest, i
> could get a bunch of
> them turned for under what it cost me to do mine.
> I would also like to note, that i can't do this
> project until the end of may
> at the earliest.
> let me know if anyone has interest.
> oh, and dave, COME GET SOME 280 PARTS!
> PARTING: 1972 Mercedes Benz 280 SE 4.5
> PARTING: 1986 Audi 4000 CS quattro
> > From: "Coleman, David"
> <David.Coleman at blackrock.com>
> > Date: Tue, 1 Apr 2008 09:39:03 -0400
> > To: too many quattros <thequattroking at yahoo.com>,
> V8 Audi Fans
> > <v8 at audifans.com>
> > Conversation: [V8] Subframe bushes
> > Subject: RE: [V8] Subframe bushes
> > I remember previously asking you about those ones
> you made... I don't
> > know who my local delrin-part manufacturer is, but
> I'd sure love a set.
> > Count me in for a set if you decide to make some
> > I promise not to pay in '72 280 parts.
> > -Dave-
> >> -----Original Message-----
> >> From: v8-bounces at audifans.com
> [mailto:v8-bounces at audifans.com] On
> > Behalf Of
> >> too many quattros
> >> Sent: Tuesday, April 01, 2008 1:21 AM
> >> To: V8 Audi Fans
> >> Subject: Re: [V8] Subframe bushes
> >> i made some out of delrin. nice upgrade.
> >> Shayne
> >> PARTING: 1972 Mercedes Benz 280 SE 4.5
> >> PARTING: 1986 Audi 4000 CS quattro
> >>> No they are not the same - last I heard they
> were dealer only.
> > Don't know for
> >>> sure.
> >>> Jason
> >> _______________________________________________
> >> Audifans V8 mailing list
> >> Send posts to: mailto:V8 at audifans.com
> >> Manage your list connection:
> > http://www.audifans.com/mailman/listinfo/v8
> >> You can help keep the audifans site running by
> shopping at
> >> http://audifans.com/shop/
> > THE INFORMATION CONTAINED IN THIS MESSAGE AND ANY
> ATTACHMENT MAY BE
> > PRIVILEGED, CONFIDENTIAL, PROPRIETARY OR OTHERWISE
> PROTECTED FROM DISCLOSURE.
> > If the reader of this message is not the intended
> recipient, you are hereby
> > notified that any dissemination, distribution,
> copying or use of this message
> > and any attachment is strictly prohibited. If you
> have received this message
> > in error, please notify us immediately by replying
> to the message and
> > permanently delete it from your computer and
> destroy any printout thereof.
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection:
> You can help keep the audifans site running by
> shopping at http://audifans.com/shop/
You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost.
More information about the V8