[V8] Blower motor ..... what a pain in the neck !!!! hands, fingers , elbows back etc...
ingo.rautenberg at gmail.com
Tue Jan 27 10:28:41 PST 2009
Unless you're driving a lhd V8, that should be the correct part for
your car, Peter. Your car is set up to drive in the UK, correct?
Otherwise, for lhd V8s, the part number (cage and motor together) is
443 959 101.
On Jan 27, 2009, at 12:51 PM, Peter Littlewood wrote:
> Hi Folks
> Well I've been putting it off for ages but the other day the blower
> finally packed up.. typically in mid winter!
> did some research found the part number( 4A0959101 A ) and ordered
> a pattern part. have spent the last 2 hours getting the old unit
> out , only to find there is a difference in the offset between
> motor and fan.
> Not a problem I thought! I'll simply put my fan on the new motor...
> but after 18 years of spinning around in the dark all it wanted to
> do was snap into two pieces....
> Is this what is usually required? to change the fan drums over?
> because the new one will not sit back into the blower housing by
> about 3/4" before it hits the end cover.
> Any help would be appreciated.
> genuine ones are no longer available from Audi in the UK anymore.
> Many thanks
> Pete Littlewood
> Check out the new and improved services from Windows Live. Learn more!
> Audifans V8 mailing list
> Send posts to: mailto:V8 at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/
> You can help keep the audifans site running by shopping at http://
More information about the V8