[V8] Bearing Puller added to Knowledgebase

S_Matus scott_matus at yahoo.com
Wed May 6 08:03:57 PDT 2009

Kent - 

Your line in the instructions "You may need to use some torque on the nut to break the bearing loose." caught my attention!

Use a hardened Gr 8 Machine thread for this purpose.


---------Original Message--------

Message: 5
Date: Tue, 05 May 2009 22:15:23 -0400
From: Kent McLean <kentmclean at comcast.net>
Subject: [V8] Bearing Puller added to Knowledgebase
To: quattro <quattro at audifans.com>, v8-list <v8 at audifans.com>,     200
    20v List <200q20v at audifans.com>,    Audi Fans <v6-12v at audifans.com>,
    s-car-list <s-car-list at audifans.com>,     A4-list <a4 at audifans.com>
Message-ID: <4A00F2BB.1010406 at comcast.net>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed



Category: Tools

Kent McLean
1999 A4 Avant, V6 Tiptronic
1991 200 TQA #3, with mods
1990 V8 w/5-speed and other mods
gone: '91 200 TQA x2, '94 100 S Avant, '89 200 TQ "Bad Puppy"


More information about the V8 mailing list