[Vwdiesel] 1982 Rabbit with 1.6, which head gasket
shea at gtsdesign.com
Tue Nov 26 16:25:38 EST 2002
Just be on the safe side, here's a more detailed view of the same
According to the Bentley, there are two series of head gaskets, the
pre-81 and 81-on. So it's important to know when your engine was made.
My 1982 Rabbit diesel has the 11mm head bolts that are associated with
the '81 engines; but it has a 1-notch gasket which was only available on
post-'81 engines. Some sort of mixing and matching has possibly
occurred, or there's some narrow overlap range on the production line.
Anway, the point is: be careful! There are two different two-notch
- 068 103 383 pre-81, for 0.43-0.63mm projection, 1.3mm gasket
- the same part number with an L, '81- for 0.83-0.93mm
projection, 1.5mm gasket thickness
[2002-11-26 17:06 -0500] Gary, Orlando (gbangs at cfl.rr.com) wrote:
> Yes, the notches indicate how thick the gasket is. The gasket is block
> dependent and not head dependent. The thickness required is determined
> by how far the pistons protrude above the block.
> There are three choices:
> 1 notch... piston up to 0.82mm above block
> 2 notch... between 0.83 - 0.92mm
> 3 notch... over 0.93mm
> -Gary, Orlando
> On Tue, 2002-11-26 at 13:37, Michael R. Hitchings wrote:
> > This is a multi-part message in MIME format.
> > --
> > [ Picked text/plain from multipart/alternative ]
> > Hey gang, I have the head off my donor engine (a 1982 1.6 with 230K
> > miles) and the head gasket was the original one. I now need to replace
> > it. The original had two notches. Do I need to get the one with one,
> > two, or three identification notches on it? What does the notch
> > identify? Thickness?
> > Thanks,
> > Mikey
> vwdiesel mailing list
> vwdiesel at vwfans.com
More information about the Vwdiesel