[Vwdiesel] Re: Driving Alt after removal of a/c

[Justin and Chelly Bennett]

Arn,
Not a problem.  Leave the Alt where it is. You will need to change the 
pully on the alt and use a different crank pully.  I used the crank 
pully off of a 1.5 gasser, don't remember where the different alt pully 
was sourced from.  Then all you have to do is find a belt that fits.  
The best way is to have a source of parts cars to mix and match.  The 
belt run is a little long, but I seemed to have less problems with the 
alt loosening up.  If you are picture capable on your email account I 
can see if the digital camera can get a picture of my setup. 
Justin 73's back to you

>
>One last thing, the 'good' car has A/C on it, and I would like to remove
>it
>and the compressor..  This means that I will have to find some other way
>to power
>the alternator, as it came powered by a secondary belt driven off the
>A/C compressor
>belt hub.   Is there stock parts that could be gotten to mount the
>alternator in
>the correct alignment to be driven off a longer belt from the crank and
>water pump?
>
>
>  
>