[Vwdiesel] Fw: Damping DigestScott Kair scott3491 at insightbb.comWed Feb 16 18:20:50 EST 2005
Mark was unable to get this to post and asked me to try again. Scott Kair > ----- Original Message ----- > From: Mark Shepherd <mark at shepher.fsnet.co.uk> > To: <vwdiesel at vwfans.com> > Sent: Wednesday, February 16, 2005 10:37 PM > Subject: Damping Digest > > > > Did any one manage to read the chapter I 'p' mailed a few > > people? Or did it cause INdigestION ;o) > > It was all interesting for me; but the big hook was the > > mention of the M1 S1 (Mass 1 Shaft1 ) ?? resonance being > > replaced by attaching a new mass and shaft to act as a > slave > > resonance substituting its 'harmless' vibrating for the > > potentially damaging crank vibration. > > It's the use of this damping by VW on the A2 for a while > to > > dampen the body vibration by bolting a mass behind the > front > > bumper.That is the barb of the hook for me... > > I have to replace all my shockers/struts on my 'Q' as they > > are very weak. When idling my car vibrates. I haven't > > measured it but it must be of the order of a few mm. > > I must rig up a gauge. > > The positioning of that A2 damper is such to make me > believe > > that it would be quite effective. Does anyone have a jpeg > of > > this and a few dimensions? Hagar if the sun is shining > > perhaps you can experiment on your engine on a stand a do > a > > 'before and after' bolting of a homemade damper on the > > block? > > Mark-The-Miser > > >
More information about the Vwdiesel mailing list |