[Vwdiesel] Injection Pump Replacement This Weekend
eriklane at gmail.com
Thu Jan 4 22:04:57 EST 2007
Just one last thing. It sounds like you have the special tools, so you're
probably set, but you didn't mention the special adapter for the dial
indicator. It's really hard to do without that. I've actually managed with a
magnetic base and long probe on the end of the dial indicator, but it's ten
times harder that way.
On 1/4/07, Andrew .Libby <libbybapa at gmail.com> wrote:
> Loren said almost word for word what I was about to type (including about
> the all-caps NO!). Whacking the teeth of the pump sprocket would be a
> really good way to damage the pump shaft bearing or shaft.
> On 1/4/07, Bryan K Walton <bryankwalton at machlink.com> wrote:
> > On Thu, Jan 04, 2007 at 12:16:57PM -0500, LBaird119 at aol.com wrote:
> > > In a message dated 1/4/2007 6:05:57 AM Pacific Standard Time,
> > > bryankwalton at machlink.com writes:
> > >
> > > > Question 1. I've read online that I need a puller to get the
> > > > off my old pump. But I've also read that I can loosen the nut then
> > give
> > > > the pulley a good sharp whack with a rubber hammer on the teeth of
> > > > pulley. Comments?
> > > >
> > >
> > > NO! You can back the nut off a couple threads, put a pry bar or
> > > two (opposite eachother) behind the sprocket (just to put some good
> > > tension on it) and then a whack or two on the nut usually pops it
> > > Loren
> > I like that suggestion much better. Thanks!
> > -Bryan
> > _______________________________________________
> > Vwdiesel mailing list
> > Vwdiesel at vwfans.com
> > http://www.audifans.com/mailman/listinfo/vwdiesel
> I'm really just fine with my own hypocrisy,
> it's when someone else is a hypocrite that it
> really ticks me off...
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
More information about the Vwdiesel