[Vwdiesel] 1.9 diesel pump difference from 1.6
jhsg at sasktel.net
Wed Mar 19 20:29:47 PDT 2008
Have a close look at the sprockets guys. The sprockets are not
interchangeable... they FIT yes, same taper, length of thread and shaft
etc, but the hub on the 1.9 pump has a different offset to accomodate
the longer snout of the 1.9 pump... of it should anyway. I had two
different sprockets in my hand today in fact.
Bryan Belman wrote:
> More expensive option is to find the front mounting
> plate and base mounting bracket for a 1.9AAZ block.
> They must be available. Canadian junk yards should
> have them. Anything 93 to 98 should be OK.
> Thanks, Bryan
> --- LBaird119 at aol.com wrote:
>> In a message dated 3/18/2008 8:36:26 PM Pacific
>> Daylight Time,
>> dieselwesty at yahoo.com writes:
>>> Here is what alarmed me. The 1.9 has a good 1/2
>>> 3/4" distance that it is going to put the pump
>>> sproket, out away from the pump.
>> Spacer/s if necessary. :-) A little time, some
>> stock aluminum
>> and a pattern and thickness measurement and I could
>> crank one
>> out on the mill if necessary. Otherwise three
>> spacers and
>> reworking the rear bolt mount would do it.
>> Create a Home Theater Like the Pros. Watch the video
>> on AOL Home.
>> Vwdiesel mailing list
>> Vwdiesel at vwfans.com
> Bryan Belman, Pt Pleasant, NJ
> 04 Jetta Wagon TDI PD, 100hp, 5sp -- running :)
> 82 Diesel Westy 1.9NA -- running :)
> 92 Jetta 1.6 Eco-Turbo Diesel -- running :)
> 90 Audi 200, 2.2L Turbo FWD -- stripping for parts now :(
> 70 Type 1 stock Beetle -- Not running well :(
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
More information about the Vwdiesel