Injector testing how?

[Pat Korach]

I just use a spare fuse to jump the fuel
pump.

pat korach

----- Original Message -----
From: "Ameer Antar" <antar at comcast.net>
To: <quattro at audifans.com>
Sent: Wednesday, August 20, 2003 10:44 AM
Subject: Re: Injector testing how?


Hey, I don't know if this has been answered yet, cuz I'm on the digest.
Anyhow, my solution to jumper the fuel pump on was to get a short piece of
18 ga. wire and crimp those flat blade-type quick disconnect terminators on
both ends. Then just plug the ends into the larger holes of the fuel pump
relay socket. To double check the right holes on your car check the wiring
diagram and the numbers on the relay in the diagram should match up to those
on the relay and socket. When I tested my injectors, I'm pretty sure I had
to jumper the fuel pump and lift the airflow plate up. BTW, this was for my
5kT. Hopefully this does the trick for ya.

-Ameer

---Original Message---
From: quattro-request at audifans.com
Date: 8/20/03 11:00:41 AM
Subject: quattro digest, Vol 1 #5297 - 12 msgs
From: CTDiesel at aol.com
Date: Wed, 20 Aug 2003 11:02:48 EDT
Subject: Injector testing how?
To: quattro at audifans.com

I am wanting to check the spray patterns of my fuel injectors so I popped
out
4 of the 5 (5th one is impossible to get to under the ISV) and lifted the
air
plate but nothing sprayed out of them and there was pressure in the line.
Does the fuel pump have to be running the whole time when you lift the air
plate?  If so how do you jumper it without a "special tool"?

Thanks
DJ

--__--__--