[s-cars] Where to source 355 rotors???

[Taka Mizutani]

Hap-
With custom hats, you should be able to use 355x32 and 332x32 Porsche rotor
rings, no?

Otherwise, try DBA, Racing Brake, AP Racing, Alcon, etc.

If you need something truly off-the-shelf with you making adapter brackets
to make things fit, I'd try some of
the MBZ AMG cars' rotors- they do have something in the 355mm range for the
higher powered cars.

Taka


On 6/19/07, captmagu at aol.com <captmagu at aol.com> wrote:
>
>
> S-heads
>
>
>
> With all the power the new stroker motor is going to put out, I have
> decided to go with bigger brakes. I need to source 355 rotors for the front
> and 330 rotors for the rear. Any suggestions out there? This move will also
> cause me to sell sveral sets of wheels. I have a set of factory bead
> polished 17x8 et35 BBS RCs with polished caps. I also have a pristine set of
> Anthracite 17x8.5 et35 SSR Comps with 255/40-17 Goodyear F1s. The wheels
> have less than 6000 miles on them and the tires less than 3000 miles. I'll
> have these in the classifieds shortly.
>
>
> Hap, wit dakine Beeg Steenkin Brakes not from Evahboost, Maguire
>
> ________________________________________________________________________
> AOL now offers free email to everyone.  Find out more about what's free
> from AOL at AOL.com.
> _______________________________________________
> S-CAR-List mailing list
> S-CAR-List at audifans.com
> http://www.audifans.com/mailman/listinfo/s-car-list
>