[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Audi tools for the poor...

> Any tried and _proven_ suggestions? I thought a piece of pipe
> with a grade 8 bolt and assorted flat washers might pull the
> control arm bushings. I tried a _lower_ control arm bushing tool,
> but it was going to destroy the arm before the bushing gave up -
> and that's after soaking overnite with penetrating oil!!!

Try an air impact hammer if you can get ahold of one of them - the 
bushings will just pop right out.
                                                         Dan Bocek