[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Anti-roll bars for 4000Q

>At 10:47 PM 2/12/96 -0500, you wrote:
>>Dear Quattrophiles-
>>I am writing to find out about experiences with changing the anti-roll
>>bars on a 4000 quattro.
>>I would like to use a larger bar up front, and install a small bar in the
>>rear.  My purpose is to reduce body roll while cornering, and dial out
>>most of the understeer.
>Mason - I think you are going in the wrong direction. Doing the above should
>increase understeer - not reduce it.

If the rear bar more than makes up for the increased stiffness of the front
bar, it would decrease understeer.

Richard Funnell,
San Jose, California
'83 urQ
'87 560 SL