[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Help..forgot starter connections?
You know where the push-on connector goes, and the braided cable (with no
insulation) is already where it goes. All other wires go to the remaining
Hope that's helpful...
> From: Myke456@aol.com
> To: firstname.lastname@example.org
> Subject: Help..forgot starter connections?
> Date: Friday, June 13, 1997 2:23 PM
> While replacing oil cooler and lines (87 5kcstq), I had to disconnect the
> starter cables. Since 2 weeks have passed since disconnecting, I've
> what I was sure I'd remember-which cable goes where? Bentley shows
> but I'm unable to determine which studs they go to, on starter/solenoid.
> The starter/solenoid has 3 electrical connections:
> 1) push on connector-no problem there
> 2) "lower" connector stud that has what appears to be a short ground
> running down to the starter motor.
> 3) "upper" connector stud.
> Which cable goes where?
> a) single cable
> b) dual cable (one of which goes directly to alternator) into one
> ([____]=====OOOO=====[____]) 87 5kcsTQ, 202k miles
> ]]]]]]][Mike Aiello][[[[[[ original owner
> Dutchess County, NY