[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Removing ventilation fan on 90Q20V

When I replaced mine I ran into the same problem. I took it to a reputable
service place. And this is what they did (in 15 min). Remove two dashbord
screws (facing the door). Then using a persuader, or pry bar (2 x 4), lift
the dash up enough to get the blower out.

Try it!

Let me know how it works


> From: Thomas Wilsher <wilsher@ucsu.Colorado.EDU>
> To: quattro@coimbra.ans.net
> Subject: Removing ventilation fan on 90Q20V
> Date: Wednesday, July 02, 1997 7:26 PM
> I'm currently attempting to remove the blower fan on the heater
> on my 20V, and have run into some problems -- namely that there 
> doesn't seem to be enough room to get the #$%^& thing out. 
> I have removed the glove compartment, as per the Bentley instructions,
> but the hose for the RHS ventilation outlet seems to block the 
> blower from being removed. Do I really have to remove this hose too? 
> It wasn't obvious how to do so, and Bentley doesn't cover it...
> --thomas