[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Steering lock removal - '91 Audi 100

If anyone could just have a look in their Bentley manual to see whether it
gives the dimensions for determining the drilling point on the lock housing
which requires a hole drilled in order to release the lock barrel pin, I
would be very grateful. My Haynes manual only gives the dimensions for older
models - these are 0.5 inch down from the top edge (key end) of the housing
casting and 0.3 inch above an imaginary  line drawn down the cylinder which
joins the large supporting web where the housing casting forms the right
angle with the lock  plunger housing - that would be at about 280 degrees
round the circumference of the lock barrel as one faces it in situ. Hard to
describe in words !

*Please* could someone have a quick look for me, as I suspect this newer
model may have a modified lock and don't want to have a lock housing like a





Cumbria, UK.