[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: wiring Q: inside the fuse box

> I have +12V on the wire from the switch (phew, didn't want to
> replace that). Connector "F/56b" has the 12V showing, and then
> the wiring diagram says it connects right to fuses 10+11. Well,
> neither of these fuses have power. Actually, they have about 0.1V
> on them. So, how is the internal connection made?

little pins soldered to a PC board.  You could have a burnt trace, or
melteed solder, or a crudded up connection at F56b (most likely IMO).

The fuse box can be removed, opened up and repaired...

Huw Powell


the steering wheel isn't connected to anything, it's just a place to
rest your hands